Cisco Systems SGH-Blast Series Voice Recognition Settings, Choice list options, Choice lists

t729.book Page 84 Thursday, July 5, 2007 3:47 PM

Voice recognition

Speak clearly when giving your command. If, after a few seconds, the handset does not recognize your command, a voice prompt asks you to repeat the command. If the software does not recognize your command the following message displays “Sorry, no match found,” and voice recognition turns off.

Important!: You must end your current VoiceSignal call before you can make another call.

Voice Recognition Tips

•Wait for the tone before you speak.

•Speak clearly and at a normal volume.

Contacts List Voice Activation

On startup VoiceSignal reads your Contacts list and voice-activates all the names. When you have add or change contacts, VoiceSignal automatically reloads and voice-activates the list when you add or modify a contact.

Voice Recognition Settings

Choice lists

VoiceSignal uses choice lists when a name or number is not clearly recognized. The software displays three choices and prompts you to select a choice.

You can modify the way VoiceSignal uses the choice lists in the settings. Each time VoiceSignal activates you can choose to view the choice list even if there is only one choice. Additionally, you can choose never to view a choice list, even if there are multiple choices. When the name or number you speak is not recognized, the Automatic setting displays the choice list.

Choice list options

1.In Idle mode, press the Menu soft key to access Menu mode.

2.Select Fun & Apps and press the Select soft key or the key.

3.Highlight Voice recognition and press the Select soft key or the key.

Fun & Apps 84