Cisco Systems SGH-Blast Series manual Network services, Call forwarding

t729.book Page 113 Thursday, July 5, 2007 3:47 PM

About sync

This feature displays information about how the synchronization feature works and provides a URL for more specific synchronization information.

Press the More Info soft key to launch the t-zones synchronization information.

Note: Your t-zones feature must be activated by T-Mobile for this feature to work.

Network services

Call forwarding

This network service enables incoming calls to be re-routed to a secondary, pre-specified number.

Example: Forwarding business calls to a colleague while on holiday.

To set your call forwarding options:

1.Select the Call forwarding option and then press the Select soft key or the

key.

2.Select a call forwarding option by pressing the Up or Down Navigation key

and then press the Select soft key or the key. The following options are available:

•Forward always: all calls are forwarded until this feature is cancelled.

•Busy: calls are forwarded when you are already on another call.

•No reply: calls are forwarded when you do not answer the phone.

•Unreachable: calls are forwarded when you are not in an area covered by T-Mobile or when your phone is switched off.

•Cancel all: all call forwarding options are canceled.

3.Select the type of forwarded calls, Voice calls or Data calls, by pressing the Up or Down Navigation key to select the appropriate field, and then

press the Select soft key or the key.

The current status displays. If the option was already set, the number to which the calls are forwarded displays.

4.To activate call forwarding, select Activate by using the Left or Right Navigation key. The Forward to field then becomes available to input the number.

113