Cisco Systems SGH-Blast Series manual T729.book Page 90 Thursday, July 5, 2007 347 PM

t729.book Page 90 Thursday, July 5, 2007 3:47 PM

Alarm

•Auto power-up: alarm rings at the specified time even if the phone is turned off. If the option is set to Off and the phone is switched off at the specified time, the alarm does not ring.

To set the alarm:

1.After selecting an alarm, highlight the Alarm option and press the key.

2.Press the Right navigation key to set Alarm to On.

3.Press the Down key to highlight the Alarm time option. Enter the time you want the Alarm to sound.

4.Press the Down key to highlight the AM/PM option. Press the Left or Right navigation key to set to AM or PM.

5.Press the Down key to highlight the Monday-Sunday checkboxes. Press

the key to bring up a list of days.

6.Place a checkmark next to the days you want the alarm to sound. To place

or remove a check mark, press the key. Press the OK soft key.

7.Press the Down key to highlight the Alarm tone option. Press the key to bring up a list of alarm melodies.

8.Press the Up or Down Navigation key to highlight a default alarm melody.

- Or -

Press the Right navigation key to display a list of sounds from which to choose.

9.Press the Save soft key.

10.Press the key to return to Idle mode.

Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & date" on page 100.

11.To stop the alarm when it rings, press any key or press the Snooze soft key.

Organizer 90