Cisco Systems SGH-Blast Series manual T729.book Page 7 Thursday, July 5, 2007 347 PM

t729.book Page 7 Thursday, July 5, 2007 3:47 PM

Important!: Verify that the handset battery is installed prior to connecting the travel adapter. If the battery is not installed and the travel adapter is connected the handset continuously power cycles and prevents proper operation.

2.Plug the adapter’s power plug into a standard AC wall outlet.

Note: The previous illustration displays the incorrect method for connecting the charger. If attempted, damage to the accessory port occurs therefore voiding the phone’s warranty.

3.When charging is finished, unplug the adapter’s power plug from the AC wall outlet and then disconnect the travel adapter’s connector from the phone.

4.Resecure the plastic cover over the interface jack on the phone.

Warning!: Failure to unplug the travel adapter before you remove the battery, can cause damage to the phone.

7