Cisco Systems SGH-Blast Series manual To change the color of the font, Skin, Brightness, Backlight

t729.book Page 105 Thursday, July 5, 2007 3:47 PM

To change the color of the font:

1.Highlight the Text color option and press the Left or Right Navigation key to select between: White, Yellow, or Blue, Green, Red or Black.

2.Press the Save soft key or the key to save your change. Otherwise, press the Back soft key.

Skin

1.Highlight the Skin option and press the UP or Down Navigation key to select Black and White.

2.Press the Save soft key or the key to save your change. Otherwise, press the Back soft key.

Brightness

You can adjust the display brightness to see it better in different lighting conditions.

1.Press the Left or Right Navigation keys to change your settings.

2.Press the Save soft key to save your changes, or the Cancel soft key to cancel.

Backlight

In this menu, you can select the length of time that the keypad backlight is on and how much longer the display is illuminated before going off.

The On setting is how long the keypad backlight is on. You can select 15 sec, 30 sec, 1 min, 3 min, or 10 min.

The Dim option is how much longer after the keypad backlight goes off that the display remains lit. You can select Off, 15 sec, 30 sec, 1 min, or 3 min.

For example, if you set On for 30 sec and Dim for 15 sec, after 30 seconds the backlight on the keys would turn off and 15 seconds later the display light would turn off.

1.Press the Left or Right Navigation keys to change each field’s settings.

2.Press the Save soft key to save your changes, or the Cancel soft key to cancel.

105