Cisco Systems SGH-Blast Series manual Security, Caller ID, PIN check

t729.book Page 115 Thursday, July 5, 2007 3:47 PM

To change the Network Selection mode:

1.Highlight the Search now option and press the Select soft key or the

key.

2.Press the Up or Down Navigation key until the network you want highlights

and then press the Select soft key or the key.

The phone scans for that network and, if available, you are connected.

To change your Default setup:

1.Highlight the Default setup option and press the Select soft key or the

key.

2.Highlight either the Automatic or Manual option and press the Select soft

key or the key.

•If you select Automatic, you connect to the first available network when roaming.

•If you select Manual, the phone begins searching for available networks. Press the Up or Down Navigation key until the network you want is highlighted and

then press the Select soft key or the key. The phone then scans the selected network to see if you can be connected, and if a connection is possible, you are connected.

Caller ID

You can prevent your phone number displaying on the phone of the person you called.

Note: Some networks do not allow you to change this setting.

The following options are available:

•Default: the default setting provided by the network is used.

•Hide number: your number does not display on the other person’s phone.

•Send number: your number is sent each time you make a call.

Security

The Security feature enables you to restrict the use of your phone by others and to restrict the types of calls.

Various codes and passwords are used to protect the features of your phone.

PIN check

When the PIN Check feature is enabled, you must enter your PIN each time you switch on the phone. Consequently, any person who does not have your PIN cannot use your phone without your approval.

115