Cisco Systems SGH-Blast Series Timer, Stopwatch, T729.book Page 99 Thursday, July 5, 2007 347 PM

t729.book Page 99 Thursday, July 5, 2007 3:47 PM

3.Use the Up, Down, Left, and Right navigation keys to select the From and To units of measure for the quantity you want converted.

4.Press the Back soft key to return to the Unit conversion menu.

Timer

You can use this menu to set a timer. To enable the Timer, use the following options:

1.Press the Set soft key to enter the length of time.

2.Enter the time and press the OK soft key.

3.Press the key to start the timer. Press the key again to stop the timer.

Stopwatch

This feature allows you to use a stopwatch. Press the key to start the stopwatch. Press the Reset soft key to erase all previously recorded stopwatch

times. Press the key for the lap time. You can have up to 4 lap times.

99