Hardware Installation
Fan Connections
There are two fan connections, the system fan and the CPU fan. The fan speed can be detected and viewed in the System Monitor section of the CMOS Setup. Both fans are automatically turned off after the system enters S3, S4 and S5
mode. |
| CPU fan connector |
|
| |
System fan connector |
| |
Fan Connector | ||
3 | 2 | 1 |
GND |
|
|
+12V |
| |
| SENSE | |
Note that the CPU fan cable can be either a
CPU Fan Connector
4 | 3 | 2 | 1 |
GND | SENSE |
| |
PWR | CONTROL | ||
COM1
The motherboard kit provides an additional serial COM header for your machine. Connect one side of a switching cable to the header and then attach the serial COM device to the other side of the cable.
FDD Connector
The motherboard supports a standard 360K, 720K, 1.2M, 1.44m, and a 2.88M floppy disk drive (FDD).
23