MAC Config
Press Enter to display the MAC Config menu.
MAC0 | LAN | [Enabled] |
MAC1 | LAN | [Disabled] |
|
|
|
MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to Auto or disable their functions.
IEEE1394 controller
This function on the Integrated Peripherals menu allows you to enable or disable the IEEE1394 (Firewire) interface.
HD Audio
This function on the Integrated Peripherals menu allows you to enable or disable the integrated high definition audio.
IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard drive needs to support block mode. Select [Enabled] to automatically detect the optimal number of block read/writes per sector the drive can support. Select [Disabled] if your drive does not support block mode.
Onboard FDC Controller
This function on the Integrated Peripherals menu allows you to enable or disable the onboard Floppy Disk Controller function.
Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the onboard serial port
1function. Options are [3F8/IRQ4], 2E8/IRQ3], [3E8/IRQ4], [Auto], and
[Disabled].