EVGA 780i SLI FTW, 132-YW-E178 manual Halt On, Memory

Page 42
Base Memory Extended Memory Total Memory

Halt On

Halt On determines whether or not the computer stops if an error is detected during power on. Use the Page Up and Page Down keys to scroll through the options or press Enter to display the Halt On sub-menu. Use the  arrow keys to position the selector in the option you choose. Press Enter to accept the changes and return to the Standard CMOS Features menu.

Drive A

[1.44,

3.5

in.]

Press ENTER to display sub-menu

Halt On

[All ,

But

Keyboard]

 

 

 

 

All Errors

Halt On

 

Whenever the BIOS detects a nonfatal error; the

All Errors

..... [ ]

system stops and prompts you.

No Errors

No Errors

..... [ ]

All , But Keyboard

..... [ ]

System boot does not stop for any detected errors.

All , But Diskette

..... [ ]

All, But Keyboard

All , But Disk/Key

..... [ ]

System boot does not stop for keyboard errors,

 

 

but does stop for all other errors.

 

 

All, But Diskette

:Move ENTER:Accept

ESC:Abort

The system boot does not stop for a diskette error

 

 

but will stop for all other errors.

 

 

All, But Disk/Key

The system boot does not stop for a keyboard or disk error, but will stop for all other errors.

Memory

These settings are display-only values that are determined by the BIOS POST (Power-On Self Test).

Base Memory

BIOS POST determines the amount

of base (or conventional) memory installed in the system.

640K

1047552K

1048576K

Extended Memory

BIOS determines how much extended memory is present during the POST.

Total Memory

This value represents the total memory of the system.

EVGA 32

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Evga force 780i SLI FTW Motherboard Evga Table of Contents COM1 Evga Evga CPU FSB List of Figures Parts not in the Kit Intentions of the KitPage Motherboard Specifications Evga nForce 780i SLI FTW MotherboardEvga Unpacking EquipmentEvga nForce 780i SLI FTW Motherboard Evga nForce 780i SLI FTW Motherboard Layout Chassis Back Panel Connectors Hardware Installation Safety InstructionsInstalling the CPU Installing the CPU FanPreparing the Motherboard Installing System Memory DIMMs Installing the Motherboard Installing the I/O ShieldSecuring the Motherboard into the Chassis Connecting Cables and Setting Switches  COM  FDD  IDEPower Connections Power Supply ConnectorsPin ATX Power PWR1 Connecting IDE Hard Disk Drives Pin ATX 12V Power PWR2Connecting Serial ATA Cables Connecting Internal Headers Front Panel HeaderIeee 1394a USB Headers Front Audio Connector AudioFan Connections GND Sense PWRCOM1 Floppy Disk Drive FDD Connector Expansion SlotsPCI Express x1 Slot Onboard System Reset and Power Buttons Clear Cmos FunctionClear Cmos Button Configuring the Bios Enter Bios Setup Main Menu Advanced Chipset Features  Standard Cmos Features Advanced Bios Features  Power Management Setup Set User Password Standard Cmos Features Menu Set Supervisor Password  Save & Exit SetupStandard Cmos Features Date and Time Auto IDE Channel and Sata Channel None  ManualDrive a  Large Auto Halt On MemoryAdvanced Bios Features CdromQuick Power On Self Test Hard Disk Boot PriorityNetwork Boot Priority Removable Device PriorityBoot Up NumLock Status First/Second/Third Boot DeviceBoot Other Device Apic ModeMPS Version Control For OS Full Screen Logo ShowAdvanced Chipset Features System Bios CacheableHpet Function Integrated Peripherals Menu Integrated Peripherals Menu Primary Master/Slave Udma IDE Function Setup IDE DMA transfer access  Serial-ATA Controller Sata x Primary/Secondary RAID ConfigUSB Config  OnChip USBIEEE1394 controller MAC ConfigIDE HDD Block Mode HD AudioPower Management Setup Menu Acpi FunctionAcpi Suspend Type Power On by Alarm Soft-Off by PbntWOLPME# From Soft-Off  Hot Key Power On Power on Function Keyboard  Password  Mouse Left  Mouse Right  Any KeyPnP/PCI Configuration Menu Reset Configuration DataInit Display First Resources Controlled By IRQ ResourcesPCI/VGA Palette Snoop PC Health Status Maximum Payload SizeDynamic Fan Control Press Enter to display the Dynamic Fan Control menuPage Frequency/Voltage Control Dummy O.CPhoenix AwardBIOS Cmos Setup Utility System Clocks System Clocks CPU Multiplier  CPU Freq, MHz FSB Reference Clock. MHz  PCIe x161, MHzSpread Spectrum  CPU Spread SpectrumFSB & Memory Config  SLI-Ready Memory Unlinked  FSB and Memory Clock Mode Linked  FSB QDR, MHz Memory Timing Setting  Optimal Expert Memory Timing Setting Expert TCL CAS Latency  Limit Cpuid MaxVal CPU Feature PPM Mode  Intel SpeedStep CPU Thermal Control  Disable Execute Disable Bit  TM1 Only Memory System Voltages Evga VDroop control  nForce SPP HT nForce SPP MCP Nvmem Memory Test nForce MCP  nForce MCP AuxiliaryLoad Timing/Voltage Set Save Timing/Voltage SetEvga Installing Drivers Software Driver InstallationEvga Evga Glossary of Terms Evga Award Post Code Award Post Codes Name Description Award Post Codes Name Description Memory above 1MB Award Post Codes Name Description RAM Nvmm Post Codes Nvmm Post Codes Name Description
Top Page Image Contents