PnP/PCI Configuration Menu
Select PnP/PCI Configuration from the CMOS Setup Utility menu and press Enter to display the PnP/PCI Configuration menu.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configuration
Init Display First | [PCI Slot] | Item Help | |
Reset Configuration Data | [Disabled] |
|
|
Resources Controlled By | [Auto(ESCD)] | Main Level | |
x IRQ Resources | Press Enter |
|
|
** PCI Express relative items ** |
|
| |
Maximum Payload Size | [4096] |
|
|
:Move Enter:Select | F10:Save ESC:Exit F1:General Help |
F5: Previous Values | F7:Defaults |
Figure 11. PnP/PCI Configuration Menu
Init Display First
This function on the PnP/PCI Configuration menu allows you to define if the initial display is in the PCI slot or in the PCI Express slot. Options are
[PCI Slot] and [PCIEx].
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of Extended System Configuration Data (ESCD) when you exit Setup.