EVGA 132-YW-E178, 780i SLI FTW manual Memory Timing Setting Expert TCL CAS Latency

Parameters	Settings Current Value
Memory Timing Setting	[		]
		Expert
tCL (CAS Latency)		[Auto(5)]		5
tRDC	[Auto(7)]			5
tRP	[Auto(7)]			5
tRAS	[Auto(23)]			18
Command Per Clock (CDM)	[Auto(2T)]			1T
** Advanced Memory Settings **				3
tRRD	[Auto(4)]
tRC	[Auto(28)]			22
tWR	[Auto(7)]			5
tWTR	[Auto(10)]			9
tREF	[Auto]			6.1uS

tCL: CAS# latency (options are 1 through 6).

tRDC: RAS#-to-CAS# Delay for Read/Write commands to the same bank (options are 1 through 7).

tRP: Row Precharge time. This is the Precharge-to-Active or Auto-to-Refresh of the same bank (options are 1 through 7).

tRAS: This is the minimum RAS# active time (options are 1 through 31).

Command Per Clock: This is the command timing setting on a per clock unit basis (options are 1T and 2T).

tRRD: RAS#-to-RAS# delay of different banks (options are 1 through 15).

tRC: RAS#-to-RAS# or auto refresh time of the same bank (options are 1 through 31).

tWR: The Write recovery time (options are 2 through 7).

tWTR: This is the minimum write-to-read delay with the same chip selected (options are 1 through 10).

tREF: This is the DRAM refresh rate (options are Auto, 7.8uS, and 3.9uS).

EVGA 56