Memory Timing Setting
Press Enter to display the Memory Timing Setting menu. Use this menu to set optimal timings or to manually enter timings.
Phoenix – AwardBIOS CMOS Setup Utility
Memory Timing Setting
| Parameters | Settings | Current Value | Item Help | |
| Memory Timing Setting | [Optimal] | 5 | Main Level | |
x | tCL (CAS Latency) | Auto(5) | |||
x | tRDC | Auto(7) | 5 | Select [Expert] to enter | |
x | tRP | Auto(7) | 5 | ||
x | tRAS | Auto(23) | 18 | timings manually | |
x Command Per Clock (CDM) | Auto(2T) | 1T |
|
| |
| ** Advanced Memory Settings ** | 3 |
|
| |
x | tRRD | Auto(4) |
|
| |
x | tRC | Auto(28) | 22 |
|
|
x | tWR | Auto(7) | 5 |
|
|
x | tWTR | Auto(10) | 9 |
|
|
x | tREF | Auto | 6.1uS |
|
|
:Move Enter:Select | F10:Save ESC:Exit F1:General Help[ |
F5: Previous Values | F7:Defaults |
Optimal
Use the Page Up and Page Down keys to select Optimal. Optimal prohibits you from manually setting any timing. All timing is set for optimal performance.
Expert
Use the Page Up and Page Down keys to select Expert. When Expert is selected, all timing categories are enabled for manual input. Note that you should set the value to Optimal to use the manufacturers’ recommended values.