BIOS | |
|
|
|
|
Note: The “Halt On:” field is used to determine when to halt the system by the BIOS if an error occurs.
Note: Floppy 3 Mode support is a mode used to support a special 3.5” drive used in Japan. This is a 3.5” disk that stores only 1.2 MB, the default setting for this is disabled.
4-2 BIOS Features Setup
Selecting the “BIOS FEATURES SETUP” option in the CMOS SETUP UTIL- ITY menu allows users to change system related parameters in the displayed menu. This menu shows all of the manufacturer’s default values for the EP- 6VBA.
Pressing the [F1] key will display a help message for the selected item.
ROM PCI/ISA BIOS(2A6LGPAA)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
|
|
|
|
| |
Virus Warning | : Disabled | Video BIOS Shadow | : Enabled | ||
CPU Internal Cache | : Enabled | : Disabled | |||
External Cache | : Enabled | : Disabled | |||
CPU L2 Cache ECC Checking | : Disabled | : Disabled | |||
|
| : Disabled | |||
Quick Power On Self Test | : Enabled | : Disabled | |||
Boot Sequence | : A, C, SCSI | : Disabled | |||
Swap Floppy Drive | : Disabled |
|
|
| |
Boot Up Floppy Seek | : Enabled |
|
|
| |
Boot Up NumLock Status | : On |
|
|
| |
IDE HDD Block Mode | : Enabled |
|
|
| |
Gate A20 option | : Fast |
|
|
| |
Memory Parity/ECC Check | : Disabled |
|
|
| |
Typematic Rate Setting | : Disabled |
|
|
| |
|
|
| |||
Typematic Rate (Chars/Sec) | : 6 | Esc | : Quit | é ê è ç : Select Item | |
Type matic Delay (Msec) | : 250 | ||||
F1 | : Help | ||||
Security Option | : Setup | ||||
F5 | : Old Values | (Shift) F2 : Color | |||
PCI/VGA Palette Snoop | : Disabled | ||||
F7 : Load Setup Defaults |
| ||||
OS Select For DRAM > 64MB | : |
| |||
|
|
| |||
|
|
|
|
| |
|
|
|
|
| |
Figure 3: BIOS Features Setup
Virus Warning:
During and after the system boots up, any attempt to write to the boot sector or partition table of the hard disk drive will halt the system and an error message will appear.
You should then run an
Page