EPoX Computer EP-6VBA Power Management Setup, OnChip USB, USB Keyboard Support, OnChip Sound

EP-6VBA BIOS

OnChip USB:

Select Enabled if your system contains a Universal Serial Bus(USB) controller and you have a USB peripheral.

USB Keyboard Support:

This controls the activation status of an optional USB keyboard that may be attached.

The default is disabled.

Enabled: Enable USB keyboard support.

Disabled: Disable USB keyboard support.

OnChip Sound:

Turn on/off onchip sound device.

OnChip Modem:

Turn on/off onchip software modem device.

4-4 Power Management Setup

Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTIL- ITY to display the following screen. This menu allows the user to modify the power management parameters and IRQ signals. In general, these parameters should not be changed unless it’s absolutely necessary.

ROM PCI/ISA BIOS (2A6LGPAA)

POWER MANAGEMENT SETUP

AWARD SOFTWARE, INC.

ACPI function	: Enabled	Primary INTR				: ON
Power Management	: User Define	IRQ3		(COM 2)		: Primary
PM Control by APM	: Yes	IRQ4		(COM 1)		: Primary
Video off After	: Suspend	IRQ5		(LPT	2)	: Primary
Video off Method	: V/H SYNC+Blank	IRQ6		(Floppy Disk)		: Primary
MODEM Use IRQ	: 3	IRQ7		(LPT	1)	: Primary
Soft-off by PWRBTN	: Delay 4 Sec	IRQ8		(RTC Alarm)		: Disabled
PWRON After PW-Fail	: Former-Status	IRQ9		(IRQ2	Redir)	: Secondary
HDD Power Down	: Disable	IRQ10		(Reserved)		: Secondary
Doze Mode	: Disable	IRQ11		(Reserved)		: Secondary
Suspend Mode	: Disable	IRQ12		(PS/2 Mouse)		: Primary
** PM Events **		IRQ13		(Coprocessor)		: Primary
		IRQ14		(Hard Disk)		: Primary
VGA	: OFF
		IRQ15		(Reserved)		: Disabled
LPT & COM	: LPT/COM
HDD & FDD	: NO	Esc : Quit				é ê è ç : Select Item
DMA/master	: OFF	F1	: Help			PU/PD/+/- : Modify
Modem Ring Resume	: Disabled
		F5	: Old Values			(Shift) F2 : Color
RTC Alarm Resume	: Disabled
		F7 : Load Setup Defaults

Figure 5: Power Management Setup

Page 4-11