Envision Peripherals EN-775E user manual Plug & Play DDC1/2B Feature, Windows INF Driver File

Page 10

Operating Instructions

EN-775e

Plug & Play DDC1/2B Feature

This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B.

The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B.

Windows INF Driver File

Most computers will automatically configure your monitor to work with your computer. For optimal viewing of your monitor, download the Envision monitor driver.

Follow these steps:

1.Go to www.ENVISIONmonitor.com

2.Click on SERVICES & SUPPORT to open the drivers web page.

3.Follow the directions on the web page to download and install the driver on your computer.

Or go to www.ENVISIONmonitor.com/support/ drivers.asp to directly access the driver web page.

EN-775e

10

31MY02

 

Image 10
Contents User’s Manual Inch Flat CRT Color MonitorFor Your Safety FCC StatementPrecautions Package Contents Using the Right Power CordGeneral Features General NotesInstalling & Removing the Base Before You Operate the MonitorConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Operating Instructions Front Panel ButtonsAdjusting the OSD Settings Plug & Play DDC1/2B Feature Windows INF Driver FileTechnical Support FAQ Problem Possible SolutionSpecifications AppendixEN-775eOptimal Viewing Mode 1024 x 768 x 85 Hz Factory Preset Timing Table Standard Resolution Horizontal VerticalConnector Pin Assignment