Envision Peripherals EN-775E user manual Technical Support FAQ, Problem Possible Solution

Page 11

 

 

Technical Support (FAQ)

EN-775e

 

 

 

 

 

Problem

Possible Solution

 

 

 

 

 

 

 

 

 

 

Power LED is not ON

• Make sure the power button is ON.

 

 

 

• Make sure the power cord is properly connected to a grounded power outlet

 

 

and to the monitor.

 

 

 

 

 

 

No Plug & Play

• Confirm that your computer is Plug & Play compatible.

 

 

 

• Confirm that your video card is Plug & Play compatible.

 

 

 

• Inspect the video cable and make sure that none of the pins are bent.

 

 

• Make sure the Envision monitor drivers are installed

 

 

 

(ENVISION monitor drivers are available at: www.ENVISIONmonitor.com)

 

 

 

 

 

Picture is fuzzy

• Adjust the Contrast and Brightness settings.

 

 

 

 

 

Picture bounces or a

• Move electrical devices away from the monitor. They may be causing

 

wave pattern is present

electrical interference.

 

 

in the picture

 

 

 

 

 

 

Power LED is ON (green

• Press a key on the keyboard or wiggle the mouse to re-activate the monitor.

 

or orange light is ON) but

• Make sure the video cable is properly connected to the computer.

 

there is no video or pic-

• Inspect the video cable and make sure none of the pins are bent.

 

ture.

• Make sure your computer is operating correctly by pressing the CAPS

 

 

LOCK key and observing whether the CAPS LOCK light turns ON or OFF.

 

 

 

 

Missing one of the pri-

• Inspect the video cable and make sure that none of the pins are bent.

 

mary colors (RED,

• Make sure the video cable is properly connected to the computer.

 

GREEN, or BLUE)

 

 

 

 

 

 

Screen image is not cen-

• Adjust the Horizontal, Vertical or Zoom settings in the OSD window.

 

tered or sized properly

 

 

 

 

 

 

 

Picture has color defects

• Adjust the User Color setting in the OSD window.

 

 

(white does not look

 

 

 

white)

 

 

 

 

 

 

EN-775e

11

31MY02

 

Image 11
Contents Inch Flat CRT Color Monitor User’s ManualFCC Statement For Your SafetyPrecautions General Notes Using the Right Power CordGeneral Features Package ContentsBefore You Operate the Monitor Installing & Removing the BaseConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Front Panel Buttons Operating InstructionsAdjusting the OSD Settings Windows INF Driver File Plug & Play DDC1/2B FeatureProblem Possible Solution Technical Support FAQAppendixEN-775e SpecificationsOptimal Viewing Mode 1024 x 768 x 85 Hz Standard Resolution Horizontal Vertical Factory Preset Timing TableConnector Pin Assignment