Envision Peripherals EN-775E user manual Adjusting the OSD Settings

Page 9

Operating Instructions

EN-775e

Adjusting the OSD Settings

1.Press the MENU button to open the OSD window.

2.Press the < or > buttons until the desired function is highlighted.

3.Press MENU to open the function’s window.

4.Press the < or > buttons to change the settings of the function.

5.To save and exit, press the EXIT icon or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4.

Note: When the OSD window is open, the input signal timing settings appear at the top.

H:stands for horizontal frequency and

V:stands for vertical frequency.

EN-775e

9

31MY02

Image 9

Contents Inch Flat CRT Color Monitor User’s ManualFCC Statement For Your SafetyPrecautions General Features Using the Right Power CordPackage Contents General NotesBefore You Operate the Monitor Installing & Removing the BaseConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Front Panel Buttons Operating InstructionsAdjusting the OSD Settings Windows INF Driver File Plug & Play DDC1/2B FeatureProblem Possible Solution Technical Support FAQAppendixEN-775e SpecificationsOptimal Viewing Mode 1024 x 768 x 85 Hz Standard Resolution Horizontal Vertical Factory Preset Timing TableConnector Pin Assignment