Envision Peripherals EN-775E user manual Before You Operate the Monitor

Before You Operate the Monitor EN-775e

Connecting the Wires Using An Optional Power Cord (Not Supplied)

The power cord supplied with your monitor can only be connected to a grounded electrical wall socket or power strip.

If you wish to connect your monitor to a power supply using the power input socket on the back of your computer, you must purchase a power cord with CEE-22 terminated connectors (see illustration above).

Follow these steps:

1.Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.

2.Connect the power cord into your monitor's power input socket.

3.Plug the other end of the power cord into the power output socket on your PC.

EN-775e 7 31MY02