Envision Peripherals EN-775E General Notes, Using the Right Power Cord, General Features

Page 4

For Your Safety

EN-775e

General Notes

Do not install the monitor near heat sources such as radiators or air ducts.

Do not place monitor in direct sunlight or in areas with excessive dust, mechanical vibration or shock.

Save the original shipping carton and packing materials in case you need to ship your monitor. Be sure to repackage your monitor as it was originally packed at the factory.

Periodically clean your monitor with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution.

Never use strong solvents such as thinners, benzene, or abrasive cleaners, since these will damage the cabinet. Always unplug the monitor before cleaning it.

Using the Right Power Cord

The supplied power cord is a NEMA 5-15 style plug. It is UL-listed and CSA labeled for

125 volts AC.

If the monitor will be connected to your computer’s power outlet, use a minimum No. 18 AWG, type SJT or SVT three conductors cord with one end terminating with a male grounded plug, rated 10A, 250V, CEE-22. The other end must terminate with

amolded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration.

General Features:

17" (43.2 cm) Color Monitor

Crisp, Clear Display for Windows

Supports Resolutions up to 1280 X 1024 pixels @60Hz

EPA ENERGY STAR®

Package Contents

The box that your monitor was shipped in should have included the following items:

1.EN-775e Color Monitor

2.Power Cord

3.Quick Start Guide

4.Booklet

(containing Warranty and Safety information)

EN-775e

4

31MY02

 

Image 4
Contents User’s Manual Inch Flat CRT Color MonitorFor Your Safety FCC StatementPrecautions Using the Right Power Cord General FeaturesPackage Contents General NotesInstalling & Removing the Base Before You Operate the MonitorConnecting the Wires Using the Power Cord Supplied Before You Operate the Monitor Operating Instructions Front Panel ButtonsAdjusting the OSD Settings Plug & Play DDC1/2B Feature Windows INF Driver FileTechnical Support FAQ Problem Possible SolutionSpecifications AppendixEN-775eOptimal Viewing Mode 1024 x 768 x 85 Hz Factory Preset Timing Table Standard Resolution Horizontal VerticalConnector Pin Assignment