Alienware M11X R3, P06T003 Removing the Coin-Cell Battery, Replacing the Coin-Cell Battery

Page 12

Back to Contents Page

Coin-Cell Battery

Alienware® M11x R3 Service Manual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery Pack) before working inside the computer.

Removing the Coin-Cell Battery

1.Follow the instructions in Before You Begin.

2.Remove the base cover (see Removing the Base Cover).

3.Remove the battery pack (see Removing the Battery Pack).

4.Follow the instructions from step 4 to step 6 in Removing the Hard Drive.

5.Remove the memory module(s) (see Removing the Memory Module(s)).

6.Remove the hinge cover (see Removing the Hinge Cover).

7.Remove the keyboard (see Removing the Keyboard).

8.Remove the palm rest assembly (see Removing the Palm Rest Assembly).

9.Disconnect the coin-cell battery cable from the connector on the system board.

10.The coin-cell battery is glued to the system board. Using a plastic scribe, pry the coin-cell battery from the system board.

1

coin-cell battery cable connector

2

coin-cell battery

 

 

 

 

 

 

 

 

 

 

 

Replacing the Coin-Cell Battery

1. Follow the instructions in Before You Begin.

Image 12
Contents Regulatory model P06T series Regulatory type P06T003 Battery Pack Removing the Battery PackReplacing the Battery Pack Back to Contents Before You Begin Recommended ToolsTurning Off Your Computer Before Working Inside Your ComputerContacting Alienware System Setup Configuring the System SetupMain Menu Wireless Menu Advanced MenuSecurity Menu Boot Menu Exit MenuBase Cover Removing the Base CoverReplacing the Base Cover Internal Card With Bluetooth Wireless Technology Removing the Bluetooth CardReplacing the Bluetooth Card Back to Contents Coin-Cell Battery Removing the Coin-Cell BatteryReplacing the Coin-Cell Battery Back to Contents Display Assembly Removing the Display AssemblyReplacing the Display Assembly Back to Contents Flashing the Bios Click Enter a Service TagClick Select Model Hard Drive Removing the Hard DriveReplacing the Hard Drive Back to Contents Hinge Cover Removing the Hinge CoverReplacing the Hinge Cover Replace the base cover see Replacing the Base Cover Board Removing the I/O BoardReplacing the I/O Board Keyboard Removing the KeyboardReplacing the Keyboard Back to Contents Status Light Board Removing the Status Light BoardReplacing the Status Light Board Memory Modules Removing the Memory ModulesReplacing the Memory Modules Click Start → Control Panel→ System and Security→ System Wireless Mini-Cards Removing the Mini-CardsReplacing the Mini-Cards Wlan 2 antenna cablesPalm Rest Assembly Removing the Palm Rest AssemblyReplacing the Palm Rest Assembly Back to Contents Power Button Board Removing the Power Button BoardReplacing the Power Button Board Back to Contents Speakers Removing the SpeakersReplacing the Speakers System Board Removing the System BoardReplacing the System Board Entering the Service Tag in the Bios