13. Remove the four screws that secure the display assembly to the computer base.
1 | screws (4) | 2 | display cable connector |
|
|
|
|
14. Gently slide the
1 | |
|
|
15. Lift the display assembly off the computer.
Replacing the Display Assembly
1.Follow the instructions in Before You Begin.
2.Slide the antenna cables in through the slot on the computer base.
3.Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4.Connect the display cable to the connector on the system board.
5.Turn the computer over and route the
6.Connect the
7.Replace the palm rest assembly (see Replacing the Palm Rest Assembly).
8.Replace the keyboard (see Replacing the Keyboard).
9.Replace the hinge cover (see Replacing the Hinge Cover).
10.Replace the memory module(s) (see Replacing the Memory Module(s)).
11.Follow the instructions from step 6 to step 8 in Replacing the Hard Drive.