Dell 600m manual Display Bezel, Display Panel

Page 13

Display Bezel

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the keyboard.

3.Remove the display assembly.

4.Use a plastic scribe to pry the six display bumpers out of the screw holes located on the front of the bezel.

5.Remove the six M2 x 5-mm screws located on the front of the bezel.

NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel.

6.Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside edge of the bezel away from the top cover.

Display Panel

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the keyboard.

3.Remove the display bezel.

4.Remove the two M2 x 5-mm screws from each side of the display panel.

5.Unsnap the cable from the top cover hook, and lift the bracket out of the display assembly.

6.Lift the display panel, and rotate the display panel out of the top cover.

7.Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.

1top flex-cable connector

2top display-cable connector

3pull-tab on bottom flex- cable connector

8.Press in both sides of the top display cable connector, and pull the display cable connector away from the top flex-cable connector.

Image 13
Contents July 2003 Rev. A01 Preparing to Work Inside the Computer Before You BeginComputer Orientation Recommended ToolsScrew Identification Page Back to Contents Flashing the Bios Remove the display assembly Bluetooth CardRemoving the Color Insert Cover Color Insert CoverReplacing the Color Insert Cover Microprocessor Module Installing the Microprocessor ModuleRemoving the Microprocessor Module Back to Contents Display Assembly Display Assembly and Display LatchPage Display Panel Display BezelDisplay Latch Remove the display assembly Remove the display bezelDocking Doors Installing the Docking DoorsRemoving the Docking Doors Back to Contents Fan Hard Drive Back to Contents Keyboard Back to Contents Base Latch Modem Modem Modem cable Palm Rest Back to Contents USB Connector Pin Assignments for I/O ConnectorsVideo Connector Parallel Connector18-25 Reserve Battery Speakers Removing the System Board System BoardInstalling the System Board System Components Removing the Microprocessor Thermal-Cooling Assembly Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly March 2003 Rev. A00 Memory Module Memory Module, Mini PCI Card, and ModulesMini PCI Card Page If the Device Security Screw Is Installed If the Device Security Screw Is Not InstalledModules Back to Contents
Related manuals
Manual 122 pages 25.24 Kb Manual 122 pages 22.12 Kb Manual 176 pages 31.73 Kb