Dell 600m manual Back to Contents

Page 19

5.Open the display approximately 1/2 inch.

NOTICE: Use firm and even pressure to slide the drive into place. If you force the hard drive into place using excessive force, you may damage the connector.

6.Press the hard drive cover down until it is fully seated in the bay, and tighten the screw.

7.Use the Operating System CD to install the operating system for your computer.

8.Use the Drivers and Utilities CD to install the drivers and utilities for your computer.

Back to Contents Page

Image 19
Contents July 2003 Rev. A01 Preparing to Work Inside the Computer Before You BeginComputer Orientation Recommended ToolsScrew Identification Page Back to Contents Flashing the Bios Remove the display assembly Bluetooth CardRemoving the Color Insert Cover Color Insert CoverReplacing the Color Insert Cover Microprocessor Module Installing the Microprocessor ModuleRemoving the Microprocessor Module Back to Contents Display Assembly Display Assembly and Display LatchPage Display Panel Display BezelDisplay Latch Remove the display assembly Remove the display bezelDocking Doors Installing the Docking DoorsRemoving the Docking Doors Back to Contents Fan Hard Drive Back to Contents Keyboard Back to Contents Base Latch Modem Modem Modem cable Palm Rest Back to Contents Parallel Connector Pin Assignments for I/O ConnectorsUSB Connector Video Connector18-25 Reserve Battery Speakers Removing the System Board System BoardInstalling the System Board System Components Removing the Microprocessor Thermal-Cooling Assembly Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly March 2003 Rev. A00 Memory Module Memory Module, Mini PCI Card, and ModulesMini PCI Card Page If the Device Security Screw Is Installed If the Device Security Screw Is Not InstalledModules Back to Contents
Related manuals
Manual 122 pages 25.24 Kb Manual 122 pages 22.12 Kb Manual 176 pages 31.73 Kb