Dell 600m manual Microprocessor Thermal-Cooling Assembly

Page 34

Back to Contents Page

Microprocessor Thermal-Cooling Assembly

Dell™ Inspiron™ 600m Service Manual

Removing the Microprocessor Thermal-Cooling Assembly

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the keyboard.

NOTE: You can remove the microprocessor thermal-cooling assembly with the fan attached.

3.Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system board.

1microprocessor thermal- cooling assembly

2captive screws (4)

4.Rotate the microprocessor thermal-cooling assembly up toward the side of the computer and away from the system board.

Installing the Microprocessor Thermal-Cooling Assembly

1.Place the left side of the microprocessor thermal-cooling assembly under the palm rest and rotate the assembly onto the system board.

2.Tighten the four captive screws, labeled "1" through "4," in consecutive order.

Back to Contents Page

Page 33 Page 35
Image 34
Page 33 Page 35
Contents July 2003 Rev. A01 Before You Begin Preparing to Work Inside the ComputerComputer Orientation Recommended ToolsScrew Identification Page Back to Contents Flashing the Bios Bluetooth Card Remove the display assemblyRemoving the Color Insert Cover Color Insert CoverReplacing the Color Insert Cover Microprocessor Module Installing the Microprocessor ModuleRemoving the Microprocessor Module Back to Contents Display Assembly and Display Latch Display AssemblyPage Display Bezel Display PanelRemove the display assembly Remove the display bezel Display LatchDocking Doors Installing the Docking DoorsRemoving the Docking Doors Back to Contents Fan Hard Drive Back to Contents Keyboard Back to Contents Base Latch Modem Modem Modem cable Palm Rest Back to Contents Video Connector Pin Assignments for I/O ConnectorsUSB Connector Parallel Connector18-25 Reserve Battery Speakers System Board Removing the System BoardInstalling the System Board System Components Removing the Microprocessor Thermal-Cooling Assembly Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly March 2003 Rev. A00 Memory Module, Mini PCI Card, and Modules Memory ModuleMini PCI Card Page If the Device Security Screw Is Installed If the Device Security Screw Is Not InstalledModules Back to Contents
Related manuals
Manual 122 pages 25.24 Kb Manual 122 pages 22.12 Kb Manual 176 pages 31.73 Kb
Top Page Image Contents