Back to Contents Page
Speaker Assembly
Dell™ Studio 1535/1536 Service Manual
Removing the Speaker Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1.Follow the instructions in Before You Begin.
2.Remove the palm rest (see Removing the Palm Rest).
3.Remove the four screws (two on each side) on the speakers.
4.Release the speaker cable from the securing tabs on the palm rest and take out the speaker assembly.
1 
screws (4) 
2 
speaker cable 
Replacing the Speaker Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1.Replace and tighten the four screws securing the speaker assembly to the palm rest.
2.Route the speaker cables carefully through the securing tabs on the palm rest.
3.Replace the palm rest (see Replacing the Palm Rest).