NOTICE: When the
Replacing the Mini-Card
NOTICE: Install the UWB
1.Follow the instructions in Before You Begin.
2.Remove the new
NOTICE: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
3.Insert the
4.Press the other end of the
5.Connect the appropriate antenna cables to the
Connectors on the | Antenna Cable Color Scheme |
|
|
WWAN (2 antenna cables) |
|
Main WWAN (white triangle) | white with gray stripe |
Auxiliary WWAN (black triangle) | black with gray stripe |
|
|
WLAN (2 or 3 antenna cables) |
|
Main WLAN (white triangle) | white |
Auxiliary WLAN (black triangle) | black |
MIMO WLAN (*gray triangle) | gray |
|
|
WPAN (one antenna cable) |
|
WPAN | blue |
|
|
* The MIMO WLAN is optional and may not be available in all computers.
NOTE: The gray antenna cable may not be available in all computers. The presence of the gray antenna cable in your
6.Secure the unused antenna cables in the protective mylar sleeve.
7.Replace the base cover and tighten the captive screws.
8.Slide the battery into the bay until it clicks into place.
9.Install the drivers and utilities for your computer, as required. For more information, see the Dell Technology Guide.
NOTE: If you are installing a communication card from a source other than Dell, you must install the appropriate drivers and utilities. For more information, see the Dell Technology Guide.