Back to Contents Page
Flashing the BIOS
Dell™ Studio 1535/1536 Service Manual
If a
Flashing the BIOS From a CD
NOTICE: Plug the AC adapter into a known, good power source to prevent loss of power. Failure to do so may cause system damage.
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
NOTE: If you use the
2. Insert the
NOTICE: Do not interrupt this process once it begins. Doing so may cause system damage.
Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the computer will automatically reboot.
3.Press <F2> during POST to enter the system setup program.
4.Press <Alt> and <f> to reset the computer defaults.
5.Press <Esc>, select Save/Exit, and press <Enter> to save configuration changes.
6.Remove the flash
Flashing the BIOS From the Hard Drive
NOTICE: Plug the AC adapter into a known, good power source to prevent loss of power. Failure to do so may cause system damage.
1.Ensure that the AC adapter is plugged in, the main battery is properly installed, and a network cable is attached.
2.Turn on the computer.
3.Locate the latest BIOS update file for your computer at support.dell.com.
4.Click Download Now to download the file.
5.If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
The File Download window appears.
6.Click Save this program to disk, and then click OK.
The Save In window appears.
7.Click the down arrow to view the Save In menu, select Desktop, and then click Save.
The file downloads to your desktop.
8.Click Close if the Download Complete window appears.
The file icon appears on your desktop and is titled the same as the downloaded BIOS update file.
NOTICE: Do not interrupt this process once it begins. Doing so may cause system damage.