Back to Contents Page
Center Control Cover
Dell™ Studio 1535/1536 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.
Removing the Center Control Cover
1.Follow the procedures in Before You Begin.
2.Remove the two screws securing the center control cover from the battery bay.
3.Turn the computer over and open the display as far as possible.
4.Pry out the center control cover with your fingers starting from the battery bay location at the back of the system.
NOTICE: To avoid damage to the data cable connected to the system board, ensure that you do not pull hard when you are lifting the center control cover.
5. Ease the center control cover up.
1 | center control cover |
|
|
6.Remove the keyboard surround by easing it out using a scribe (see Removing the Keyboard).
7.Remove the two screws from the top of the keyboard.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and