Dell 5000 Series owner manual Latch

Page 28

4Note the display-cable routing and remove the cable from the routing guides.

1	latch	2	display cable
3	I/O-board cable	4	fan

5Disconnect the fan cable from the system board.

6Note the fan-cable routing and remove the cable from the routing guides.

7Remove the screws that secure the fan to the base frame.

28

Image 28

Contents Inspiron Page Contents Removing the Wireless Card Removing the Base Frame Removing the I/O Board Removing the Power-Adapter Port Before Working Inside Your Computer Before You BeginRecommended Tools Philips screwdriver Plastic scribe After Working Inside Your Computer Procedure Removing the Base CoverReplacing the Base Cover Removing the Battery Replacing the Battery Removing the Hard Drive Page Page Replacing the Hard Drive Removing the Wireless Card Wireless-card slot Replacing the Wireless Card Removing the Memory Modules Page Replacing the Memory Modules Post-requisites Removing the Fan Latch Lift the fan off the palm rest Fan cable Screws Replacing the Fan Removing the Keyboard Page Page Replacing the Keyboard Folding the Keyboard CablesPage Page Page Removing the Base Frame Procedure Page Board cable Base frame Tabs Replacing the Base Frame Removing the Heat Sink Lift the heat sink off the system board Screws Heat sink Replacing the Heat Sink Removing the Coin-Cell Battery Page Replacing the Coin-Cell Battery Removing the Speakers Page Replacing the Speakers Removing the I/O Board Lift the I/O board off the palm rest Screw Board cable Replacing the I/O Board Removing the Status-Light Board Page Page Page Replacing the Status-Light Board Removing the System Board Page Speaker cable Page Page Replacing the System Board Replace the memory modulesRemoving the Display Assembly Procedure Display assembly Replacing the Display Assembly Antenna cables Removing the Power-Adapter Port Page Page Power-adapter port Power-adapter port cable Replacing the Power-Adapter Port Replace the display assemblyRemoving the Palm Rest Page Replace the display assembly Replace the status light board Replacing the Palm RestFlashing the Bios