Dell 1501 owner manual Removing a Fan

Back to Contents Page

Fan

Dell™ Inspiron™ 1501 Service Manual

Removing a Fan

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.

Removing a Fan

1.Follow the instructions in Before You Begin.

2.Remove the hinge cover (see Removing the Hinge Cover).

3.Remove the keyboard (see Removing the Keyboard).

4.Remove the display assembly (see Removing the Display Assembly).

5.Remove the palm rest (see Removing the Palm Rest).

6.Remove the two M2.5 x 5-mm screws from the fan.

7.Disconnect the fan connector from the connector on the system board.

1 fan 2 M2.5 x 5-mm screws (2) 3 fan cable connector

4fan system board connector

Back to Contents Page