Dell 1501 owner manual Replacing a Mini-Card

Page 10

1	system board connector	2	Mini-Card	3	metal securing tabs (2)

Replacing a Mini-Card

NOTICE: The system board and Mini-Card connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.

NOTICE: Make sure the antenna cables are not under the card when you insert it.

1. Insert the Mini-Card connector into the system board connector at a 45-degree angle.

1

system board connector

2

Mini-Card

2.Press the other end of the Mini-Card into the securing tabs until the card clicks into place.

3.Connect the black antenna cable to the connector labeled with a black triangle, and connect the white antenna cable to the connector labeled with a white triangle.

Image 10

Contents Abbreviations and Acronyms Battery Latch Assembly Removing the Battery Latch AssemblyReplacing the Battery Latch Assembly Turning Off Your Computer Before You BeginRecommended Tools Before Working Inside Your ComputerBack to Contents Flashing the Bios Removing the ExpressCard/Hard-Drive Bay Assembly ExpressCard/Hard-Drive Bay AssemblyReplacing the ExpressCard/Hard-Drive Bay Assembly Back to Contents Mini-Card Removing a Mini-CardReplacing a Mini-Card Back to Contents Removing the Coin-Cell Battery Coin-Cell BatteryReplacing the Coin-Cell Battery Processor Module Removing the Processor ModuleReplacing the Processor Module Removing the Processor Thermal-Cooling Assembly Processor Thermal-Cooling AssemblyReplacing the Processor Thermal-Cooling Assembly Display Assembly Removing the Display AssemblyReplacing the Display Assembly Display BezelRemoving the Display Bezel Display Panel Removing the Display PanelDisplay Latch Replacing the Display PanelBack to Contents Fan Removing a FanRemoving the Hard Drive Hard DriveReplacing the Hard Drive Back to Contents Removing the Hinge Cover Hinge CoverReplacing the Hinge Cover Removing the Keyboard KeyboardReplacing the Keyboard Back to Contents Memory Modules Removing the Memory ModulesReplacing the Memory Modules Modem Removing the ModemReplacing the Modem Optical Drive Removing an Optical DrivePalm Rest Removing the Palm RestBack to Contents USB Connector Pin Assignments for I/O ConnectorsVideo Connector Speakers Removing the SpeakersCable routing clip Speaker cable System Board Removing the System BoardReplacing the System Board Replace the processor see Replacing the Processor ModuleBack to Contents

Related manuals

Manual 164 pages 31.97 Kb