Dell 1501 owner manual Removing a Mini-Card

Back to Contents Page

Mini-Card

Dell™ Inspiron™ 1501 Service Manual

Removing a Mini-Card

Replacing a Mini-Card

If you ordered a Mini-Card with your computer, the card is already installed.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before you begin working inside the computer.

Removing a Mini-Card

1.Follow the procedures in Before You Begin.

2.Remove the hinge cover (see Removing the Hinge Cover).

3.Remove the keyboard (see Removing the Keyboard).

4.Disconnect the two antenna cables from the Mini-Card.

1 Mini-Card 2 antenna cables (2)

3 antenna cable connectors (2)

5.Release the Mini-Card by pushing the metal securing tabs toward the back of the computer until the card pops up slightly.

6.Lift the Mini-Card out of its system board connector.