Dell B110 service manual Replace the computer cover

Page 28

9. Align the notch on the bottom of the module with the crossbar in the connector.

NOTICE: To avoid breaking the memory module, do not press near the middle of the module.

10.Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

11.Replace the computer cover.

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

12.Connect your computer and devices to electrical outlets, and then turn them on.

13.Click the Start button, right-click My Computer, and then click Properties.

14.Click the General tab.

Image 28

Contents Abbreviations and Acronyms Before You Begin Getting StartedRecommended Tools Turning Off Your ComputerOpen the computer cover Back to Contents Turn off your computerRemoving the Computer Cover Technical Overview Inside View of Your Computer System Board ComponentsPower Supply DC Connector Pin Assignments Minimum Current a Maximum Current a DC Power Connector P2 DC Power Connector P1Pin Number Signal name Wire Color DC Power Connectors P8 and P9 DC Power Connector P4DC Power Connector P6 Pin Number Signal Name 18-AWG Wire ColorDC Power Connector P7 Pin Number Signal Name 22-AWG Wire ColorMemory Technical SpecificationsComputer Information Connectors VideoAudio Expansion BusPower Controls and LightsPhysical EnvironmentalBack to Contents Advanced Troubleshooting Power LightsRemove and then reinstall the memory modules Network LightsDiagnostic Lights Light Pattern Problem DescriptionSuggested Resolution Yellow LEDBeep Codes Code CauseSystem setup program Enter the system setup program, verifySystem Messages Message Possible Cause Corrective ActionFDD System Setup Entering System SetupSystem Setup Screens OverviewSystem Setup Options Drive ConfigurationSystem Hard-Disk Drive SequenceBoot Sequence Memory InformationCPU Information Integrated DevicesBoot Sequence Option SettingsChanging Boot Sequence for the Current Boot Power ManagementChanging Boot Sequence for Future Boots Clearing Forgotten PasswordsEnter system setup Replace the computer cover Removing and Installing Parts Memory Installation GuidelinesHard Drive Power Supply Floppy Drive Battery MemoryInstalling Memory Shut down the computer through the Start menuReplace the computer cover Cards PCI CardsBefore installing any cards Front Panel Removing the Front PanelRemoving the Front-Panel Insert Remove the computer coverReattaching the Front Panel General Installation Guidelines Connecting Drive CablesDrives Hard DriveRemoving a Hard Drive Installing a Hard Drive Page Floppy Drive Removing a Floppy DriveInstalling a Floppy Drive CD/DVD Drive Removing a CD/DVD DriveInstalling a CD/DVD Drive Adding a Second CD or DVD Drive Page Processor Removing the ProcessorInstalling the Processor Page Fan Assembly Removing the Fan AssemblyReplacing the Fan Assembly System Board Remove the microprocessor heat sink Remove the fan assemblyRemoving the System Board Installing the System Board Reinstall the fan assemblyRemoving the Power Supply Power SupplyReplacing the Power Supply Battery Replace the computer cover Replacing the Computer Cover

Related manuals

Manual 116 pages 9.03 Kb

Manual 116 pages 3.25 Kb

Manual 54 pages 62.68 Kb