is in a zero load condition.
DC Power Connector P1
NOTE: The +3.3 VDC output wires (orange) must be 16 AWG. All other output wires must be 18 AWG.
Pin Number 
Signal name 
Wire Color 
1 | +3.3 VDC | Orange | |
2 | +3.3 VDC | Orange | |
3 | COM | Black | |
4 | +5 | VDC | Red |
5 | COM | Black | |
6 | +5 | VDC | Red |
7 | COM | Black | |
8 | POK | Gray | |
9 | +5 | VFP | Purple |
10 | +12 VDC | Yellow | |
11 | +3.3 VDC | Orange | |
12 | Blue | ||
13 | COM | Black | |
14 | PS_ON | Green | |
15 | COM | Black | |
16 | COM | Black | |
17 | COM | Black | |
18 | N/C | N/C | |
19 | +5 | VDC | Red |
20 | +5 | VDC | Red |