Installing the Keyboard
1.Attach the keyboard flat flex cable to the keyboard.
2.Affix the adhesive tape securing the keyboard flat flex cable to the keyboard.
3.Slide the keyboard into its compartment until all the metal tabs fit into their positions.
4.Fasten the keyboard cable clip.
5.Press down on the keyboard to the left and right side ensuring that all the snaps are fully engaged with the computer.
6.Install the screws that secure the keyboard to the palm rest.
7.Install the screw at the back of the computer.
8.Install :
a)keyboard trim
b)battery
9.Follow the procedures in After Working Inside Your Computer.
Removing the Access Panel
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery.
3.Remove the screws that secure the access panel.
17