Installing the Power Connector
1.Install the power connector in the computer.
2.Thread the power connector cable in the routing channel.
3.Install:
a)system board
b)left support bracket
c)display assembly
d)ExpressCard reader cage
e)palmrest
f)thermal module
g)right base panel
h)WLAN card
i)hard drive
j)optical drive
k)keyboard
l)keyboard trim
m)access panel
n)battery
o)SD memory card
4.Follow the procedures in After Working Inside Your Computer.
Removing the System Fan
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)SD memory card
b)battery
c)access panel
d)keyboard trim
e)keyboard
44