Removing and Installing Components
This section provides detailed information on how to remove or install the components from your computer.
Recommended Tools
The procedures in this document may require the following tools:
•Small
•Phillips screwdriver
•Small plastic scribe
Removing the SD Memory Card
1.Follow the procedures in Before Working Inside Your Computer.
2.Press in on the SD memory card to release it from the computer.
3.Slide the SD memory card out of the computer.
Installing the SD Memory Card
1.Push the memory card into the compartment until it clicks into place.
2.Follow the procedures in After Working Inside Your Computer.
Removing the Battery
1.Follow the procedures in Before Working Inside Your Computer.
2.Slide the battery release latches into the unlock position.
7