b)ExpressCard
c)battery
d)access panel
e)keyboard trim
f)optical drive
g)hard drive
h)WLAN card
i)right base panel
j)thermal module
k)palmrest
l)ExpressCard reader cage
m)display assembly
n)left support frame
o)system board
3.Disconnect the
4.Pry the
Installing the Coin-Cell Battery
1.Place the
2.Connect the
3.Install:
a)system board
b)left support frame
c)display assembly
d)ExpressCard reader cage
e)palmrest
f)thermal module
g)right base panel
h)WLAN card
i)hard drive
j)optical drive
k)keyboard
l)keyboard trim
m)access panel
n)battery
o)ExpressCard
p)SD memory card
4.Follow the procedures in After Working Inside Your Computer.
Removing the Input/Output (I/O) Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
41