Installing the Optical Drive
1.Place the optical drive on to the computer.
2.Tighten the screws that secure the optical drive to the computer.
3.Install:
a.Hard Drive
b.Battery
4.Follow the procedures in After Working Inside Your computer
Removing the Optical Drive Connector
1.Follow the procedures in Before Working Inside Your Computer
2.Remove:
a.Battery
b.Hard Drive
c.Optical Drive
d.Bottom Cover
3.Perform the following steps as shown in the illustration:
a.Remove the screws that secure the optical drive connector to the computer [1].
b.Lift the connector in an upward direction [2].
c.Remove the screws that secure the connector to the computer [3].
d.Lift the tab in an upwards direction [4].
e.Lift the locking tab [1].
f.Disconnect the optical drive connector cable from the system board [2].
4.Remove the optical drive connector from the computer.
Installing the Optical Drive Connector
1.Place the optical drive on to the computer.
2.Connect the optical drive connector cable.
3.Press the locking tab.
4.Tighten the screws that secure the optical drive to the computer.
5.Flip the optical drive connector and seat it.
6.Tighten the screw that secures the optical drive connector to the computer.
7.Install:
10