Dell P46G owner manual After Working Inside Your Computer

Page 7

2.Click the arrow in the lower-right corner of the Start menu as shown below, and then click

Shut Down .

2.Ensure that the computer and all attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your operating system, press and hold the power button for about 6 seconds to turn them off.

After Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any external devices, cards, and cables before turning on your computer.

CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for other Dell computers.

1.Connect any external devices, such as a port replicator or media base, and replace any cards, such as an ExpressCard.

2.Connect any telephone or network cables to your computer.

CAUTION: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

3.Replace the battery.

4.Connect your computer and all attached devices to their electrical outlets.

5.Turn on your computer.

7

Image 7

Contents Dell Latitude 14 Rugged Page Contents Specifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerTurning Off Your Computer After Working Inside Your Computer Battery Removing the BatteryInstalling the Battery Follow the procedures in After Working Inside Your computerBattery Hard Drive Installing the Hard DriveRemoving the Optical Drive Battery Hard Drive Optical Drive Bottom Cover Installing the Optical DriveRemoving the Optical Drive Connector Installing the Optical Drive ConnectorRemoving the Bottom Cover Battery Hard Drive Optical DriveInstalling the Bottom Cover Removing the Keyboard Installing the Memory Module Installing the KeyboardRemoving the Memory Module Battery Bottom Cover Installing the Docking BoardRemoving the Docking Board Battery Hard Drive Optical Drive Bottom Cover Docking Board Installing the GPU BoardRemoving the GPU Board Removing the SIM Module Installing the SIM ModuleRemoving the Wwan Card Installing the Wlan CardBattery Hard Drive Optical Drive Bottom Cover GPS Holder Removing the Wlan CardRemoving the GPS Holder Installing the Wwan CardRemoving the Heatsink Installing the GPS HolderRemoving the System Fan Installing the HeatsinkRemoving the RF Holder Installing the System FanRemoving the Display Assembly Installing the RF HolderPage Removing the I/O Board Installing the Display AssemblyPage Removing the Storage Connector Installing the I/O BoardRemoving the SSD Bracket Installing the Storage ConnectorRemoving the USH Board Installing the SSD BracketInstalling the Driving Board Installing the USH BoardRemoving the Driving Board O Board Bottom Cover Optical Drive Hard Drive Removing the Battery ConnectorInstalling the Battery Connector Battery Hard Drive Optical Drive Bottom Cover O BoardRemoving the System Board Installing the System Board Navigation Keys Boot SequenceSystem Setup Options PS2 SATA-0 Video Page KEK Performance Page Post Behavior Wwan System and Setup Password Updating the BiosAssigning a System Password and Setup Password Page Enhanced Pre-Boot System Assessment ePSA Diagnostics DiagnosticsDevice Status Lights Battery Status LightsSpecifications UMA Display Feature Specification Active Area Axis 99.5 mm 53 mm Auto-air Adapter Page Contacting Dell