Procedure
1Remove the screws that secure the palm-rest assembly to the computer base.
2Turn the computer over and open the display as far as possible.
3Remove the center-control cover (see "Removing the Center-Control Cover" on page 33).
4Remove the keyboard (see "Removing the Keyboard" on page 37).
CAUTION: Use the pull-tabs on top of the connectors to avoid damage to the connectors.
5Lift the connector latches and use the pull-tabs to disconnect the touchpad cable and power-button board cable from the connectors on the system board.
6Disconnect the speakers cable and status-light board cable from the connectors on the system board.