B136SPK1 ¼" Facia Front Enclosure Kit
Procedures
1.Remove toe grille from front of refrigerator by removing 2 screws and pulling forward.
Clip
2.Remove drain pan clip from old toe grille and snap onto toe grille provided. Install toe grille by attaching to cabinet in same holes as previous toe grille, with 2 truss head 1/4" sheet metal screws.
•New toe grille will not be as wide as original toe grille to allow installation of new side extrusion.
3.Remove front side extrusion and white spacer strip by removing 11 screws on both left and right sides. Retain white spacer strip located on machine compartment side.
4.Install new front side extrusion provided with kit using screws removed in step 3. Replace white spacer strip along machine compartment side.
•If cabinet opening is less then 84 1/4" high, side extrusion needs to be trimmed to desired height.
Front
side extrusion
5.Mount left and right panel brackets to wood panel using 3/16" phillips screws provided.
•If base panel is not 1/4" thick use plastic shims provided with kit to bring base panel depth up to 1/4".
Side extrusion
3/4" Raised | 1/4" Filler |
overlay panel | panel |
(Optional) |
|
Side of |
|
refrigerator | Panel |
| bracket |
RS1200001 | 62 | November 1996 |
