Amana Bottom Mount Refrigerator service manual Bottom cabinet Panel Extrusion

B136SPK1 ¼" Facia Front Enclosure Kit

6.Mount bottom panel brackets using five, 3/16" phillips screws.

•If base panel is not 1/4" thick, use plastic shims provided with kit to bring base panel depth up to 1/4".

7.Mount bottom cabinet extrusion using five, 1/4" flat head phillips screws.

Bottom cabinet extrusion

9.Slide panels into place on left and right side of refrigerator. Verify that panel bracket is resting in track on bottom cabinet extrusion. For smoother installation, apply bar soap to cabinet extrusions and panel brackets.

Bottom cabinet	1/4" Panel
extrusion	3/4" Panel
	(Optional)

Panel

Side ofbracket refrigerator

8.While facing back of refrigerator, remove 7 screws from right edge of refrigerator cabinet.

•Also, front panel bracket must fit in gap in front side extrusion.

Slide panel in here

Remove screws

L-Bracket

Bottom cabinet extrusion

10.Line up holes in right side L-bracket with holes from 7 screws removed in step 4. Attach L-bracket to back of refrigerator using 7 screws removed in step 4.

November 1996 63 RS1200001