B136CKR1 and B136CKL1 Custom Handle Kit
Top trim
Side trim
Trim insert
3/8" 
screws
5.See "Procedures, Refrigerator Door", steps 3 through 5 for panel assembly procedure.
6.Align panel in trim and push evenly. Start at one end and work across. For smoother installation, apply bar soap on door trim and freezer trim.
7.Replace side trim by inserting five, 3/8" screws.
8.Replace trim insert. Start one edge of insert in track and press other edge into track while working up side of door.
9.Install new top trim by replacing five, 1" screws.
10.Cut new handle insert to a length of 35 1/4". Install new trim insert. Start one edge of insert in track and press other edge into track while working up side of door.
11.Optional: install filler block on top of top trim using 1" wide double sided foam tape provided.
•For dimensions of filler block see "Freezer Drawer Top Wood Spacer Right Side Hinge Cutout Dimensions" pages 5, or "Freezer Drawer Top Wood Spacer Left Side Hinge Cutout Dimensions" page 6 of this manual.
•Double sided tape is provided in three, 10" strips.
•Verify placement of filler block before applying double sided tape. Tape cannot be removed once applied to filler block.
November 1996 | 57 | RS1200001 |
