B136SPK2 ¾" Side Panel Kit
Procedure
1.Mount left and right panel brackets to wood panel using 3/16" phillips screws provided.
•If base panel is not 1/4" thick, use plastic shims provided with kit to bring base panel depth up to 1/4".
1/4" filler
3/4" raisedpanel overlay panel
Panel 
bracket
4.While facing back of refrigerator, remove 7 screws from right edge of refrigerator cabinet.
Remove |
screws |
2.Mount bottom panel brackets using 5, 3/16" phillips screws.
•If base panel is not 1/4" thick use plastic shims provided with kit to bring base panel depth up to 1/4".
3.Mount bottom cabinet extrusion using 5, 1/4" flat head phillips screws.
5.Slide panels into place on left and right side of refrigerator. Verify that panel bracket is resting in track on bottom cabinet extrusion. For smoother installation, apply bar soap to cabinet extrusions and panel brackets.
Bottom cabinet |
|
extrusion | Panel |
|
Bottom cabinet extrusion
Side of refrigerator
Panel bracket
November 1996 | 69 | RS1200001 |
