12.Make note of the camera cable routing and disconnect it from the connector on the camera module.
13.Lift the camera module off the display frame.
1 camera cable
Replacing the Camera Module
1.Follow the instructions in Before You Begin.
2.Use the alignment posts on the display frame to place the camera module in position.
3.Route and connect the camera cable to the connector on the camera module.
4.Replace the display panel (see Replacing the Display Panel).
5.Replace the display hinges (see Replacing the Display Hinges).
6.Replace the display bezel (see Replacing the Display Bezel).
7.Replace the hinge caps (see Replacing the Hinge Caps).
8.Replace the display assembly (see Replacing the Display Assembly).
9.Replace the memory module (see Replacing the Memory Module).
10.Replace the battery (see Replacing the Battery).
11.Replace the
12.Replace the keyboard (see Replacing the Keyboard).
13.Replace the label door (see Replacing the Label Door).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.