Back to Contents Page
Camera Module
Dell™ Inspiron™ 1090 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
Removing the Camera Module
1.Follow the instructions in Before You Begin.
2.Remove the label door (see Removing the Label Door).
3.Remove the keyboard (see Removing the Keyboard).
4.Remove the
5.Remove the battery (see Removing the Battery).
6.Remove the memory module (see Removing the Memory Module).
7.Remove the display assembly (see Removing the Display Assembly).
8.Remove the hinge caps (see Removing the Hinge Caps).
9.Remove the display bezel (see Removing the Display Bezel).
10.Remove the display hinges (see Removing the Display Hinges).
11.Remove the display panel (see Removing the Display Panel).
1 
camera module