Dell 1090 manual Removing the Label Door, Replacing the Label Door

Back to Contents Page

Label Door

Dell™ Inspiron™ 1090 Service Manual

Removing the Label Door

Replacing the Label Door

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

Removing the Label Door

1.Follow the instructions in Before You Begin.

2.Slide the label door out to release the tabs on the label door from the slots on the computer base.

1 label door 2 label-door tabs (3)

Replacing the Label Door

1.Follow the instructions in Before You Begin.

2.Align the label door tabs with the slots on the computer base and slide it in place.

Back to Contents Page