Error Code: Error Message: What it indicates: | Solution: |
1100 | Paper jam | A paper jam exists in the |
|
| printer. |
1101 | Paper out | The printer is out of paper. |
1102 | Incorrect | The ink cartridge is not valid. |
| print head |
|
1103 | Missing print | An ink cartridge has not been |
| head | installed. |
Clear the paper jam. For more information, see "Paper Problems" on page 57.
Load more paper into the printer. For more information, see "Loading Paper" on page 19.
Replace the ink cartridge. For more information, see "Replacing Ink Cartridges" on page 49.
Install an ink cartridge in the empty carrier. For more information, see "Replacing Ink Cartridges" on page 49.
1104 | Print head | The ink cartridges have been |
| order | installed in the wrong carriers. |
1200 | Print carrier | The ink cartridge carrier has |
| stall | stalled. |
1201 | Data error or incomplete data. | |
| incomplete |
|
1203 | Print head | Short circuit detected in the |
| short | print head. |
1204 | Print head | Unable to program print head |
| programming | ID. |
1205 | Mono TSR error Problem in the mono TSR | |
|
| circuit. |
1206 | Color TSR | Problem in the color TSR |
| error | circuit. |
1208 | Incorrect home | The printer is unable to locate |
| position | the cartridge home position. |
2100 | Unlock scanner | The scan carrier has stalled. |
Swap the ink cartridges. For more information, see "Replacing Ink Cartridges" on page 49.
Disconnect the printer power cable, check for paper jams, and then reconnect the power cable.
Press the Power button to reset.
Disconnect and then reconnect the printer power cable. Reinstall the ink cartridges. For more information, see "Replacing Ink Cartridges" on page 49.
Reinstall the ink cartridges. For more information, see "Replacing Ink Cartridges" on page 49.
Reinstall the black ink cartridge. For more information, see "Replacing Ink Cartridges" on page 49.
Reinstall the color ink cartridge. For more information, see "Replacing Ink Cartridges" on page 49.
Clear the carrier jam and press the Start button .
Turn off the printer, wait a few seconds, and then turn on the printer.
Troubleshooting
59